Depending on your Wi-Fi router's settings, you may need to enter the LeapPad's Ultra's Mac address to the router's filter in order to allow the LeapPad Ultra to connect to your router's network. The LeapPad Ultra's Mac address can be located with these steps: 1. Power on the LeapPad Ultra. 2. At the bott...
To connect to a new wifi network: 1. Power on the LeapPad Ultra 2. At the bottom of the "Sign In" screen, click the blue icon of a parent and child ![][1] 3. You will be prompted to enter your 4 digit Parent Lock code to access Parent Mode. Enter your code. 4. This will bring you to the Parent Settings...
Once you have confirmed you have a Wi-Fi connection on the LeapPad3, follow these steps: 1. At the bottom of the LeapPad3 "Sign In" screen, click the blue icon of a parent and child 2. You will be prompted to enter your 4 digit Parent Lock code to access Parent Mode. Enter your code. 3. This will bring you to ...
LeapSearch is available on LeapPad Ultra, LeapPad Platinum and LeapPad 3 and LeapFrog Epic using the device's WiFi connection ...
The LeapPad device will shut down due to inactivity. Depending on if the game is paused or if you are connected via USB cable to your computer, the time can vary. This time can range from 4 to 7 minutes before the unit will shut down. ...
Download and install this LeapFrog [utility program][1] Run the utility and select the option "Uninstall LeapFrog Connect", then "Complete..like it was never there." When the uninstall is complete, restart your computer. Next, run the permissions repair function in Disk Utility, then sign in as an administr...
If you forgot the four digit parent lock code you set up for the LeapPad3 or LeapPad Ultra, you may retrieve the code with these steps: 1. Using a computer or other device connected to the internet, go to www.leapfrog.com 2. Click "Log In/Register" (or "My Account" if already signed in) on the top right of the pag...
Disconnect all cords before cleaning. Clean the product with a slightly damp cloth (cold water). Do not use soap, detergent or other chemicals. Never submerge the unit in water. Allow to dry thoroughly before re-use. Do not connect to the USB cable if wet or damaged. ...
Your LeapReader likely needs to be charged - try charging it by connecting LeapReader to your computer with the USB cord for at least one hour. Note, a full charge will normally take 3 to 5 hours. ...
1. Ensure the LeapTV power adapter is inserted firmly into the console, and the AC plug is connected directly to the wall outlet (eliminating any surge protector). 2. Check if the electrical outlet is controlled by a wall switch. 3. Try plugging the LeapTV adapter into a different outlet in your home to verify the...