The micro SD card slot on the LeapFrog Epic tablet is covered by the bumper. It is located between the USB port and the power button.

To insert a micro SD card:

1. Carefully remove the bumper from the LeapFrog Epic tablet.

2. Insert a micro SD memory card (not included) into the micro SD slot.  Push the card all the way into the spring loaded slot. If the card does not lock into place, try using the rounded edge of a safety pin, a nail file, or a small flathead screwdriver to push the micro SD card in until it locks.

To remove a micro SD card:

1. You will need to use the spring loaded action to remove the micro SD card from the slot.  Using whatever you used to push the card into the locked position (finger nail, safety pin, nail file, etc.) gently push the card all the way into the slot so that it springs out slightly.

2. Once the micro SD card protrudes slightly from the slot, use your finger nails to grab and pull it all the way out.